Netbios-name-server <address1> <address2 – ADTRAN 5000 Series User Manual
Page 1066
Command Reference Guide
IKE Client Command Set
61200990L1-35E
Copyright © 2005 ADTRAN
1066
netbios-name-server <address1> <address2>
Use the netbios-name-server command to specify the NetBIOS Windows Internet Naming Service
(WINS) name servers to assign to a client.
Syntax Description
<address1>
Specifies the first WINs server address to assign.
<address2>
Specifies the second WINs server address to assign.
Default Values
By default, no WINs server address is defined.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 4.1
Command was introduced.
Usage Examples
The following example defines two WINs server addresses for this configuration pool:
(config)#crypto ike client configuration pool ConfigPool1
(config-ike-client-pool)#netbios-name-server 172.1.17.1 172.1.17.25