ADTRAN 5000 Series - Manual (Page 142)

Command Reference Guide Enable Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 142
dir [<input> | flash | flash <input>]
Use the dir flash command to list all of the files stored in flash.
Syntax Description
<input> Lists all files stored in flash that match the specified pattern.
flash Lists all files stored in flash.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following is example lists all files stored in flash:
>enable
#dir flash