ADTRAN 5000 Series - Manual (Page 63)

Command Reference Guide Enable Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 63
clear lldp counters interface <interface>
Use the clear lldp counters interface command to reset all local loop demarkation point (LLDP) packet
counters to zero for a specified interface.
Syntax Description
<interface> Clears the information for the specified interface. Type clear lldp counters
interface ? for a complete list of applicable interfaces.
Default Values
No default values are necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example resets the counters on PPP interface 1:
>enable
#clear lldp counters interface ppp 1