ADTRAN 5000 Series - Manual (Page 1032)

Command Reference Guide CA Profile Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 1032
enrollment terminal
Use the enrollment terminal command to specify manual (i.e., cut-and-paste) certificate enrollment.
Syntax Description
No subcommands.
Default Values
By default, this command is enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
This mode is overridden if the enrollment url command specifies the CA to which automatic certificate
requests are to be sent via simple certificate exchange protocol (SCEP). Issuing an enrollment terminal
command after using the enrollment url command deletes the URL and forces the unit to use manual
enrollment. Refer to
enrollment url <url> on page 1033 for more information.
Usage Examples
The following example configures the AOS to accept manual certificate enrollment input:
(ca-profile)#enrollment terminal