ADTRAN 5000 Series - Manual (Page 1187)

Command Reference Guide Route Map Command Set
61200990L1-35E Copyright © 2005 ADTRAN 1187
set ip df
Use the set ip df command to identify the packet as “don’t fragment” (DF). Use the no form of this
command to remove this designation.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 2000 and 5000 Series, and Total Access 900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example designates the packet as “don’t fragment”:
(config)#route-map MyMap permit 100
(config-route-map)#set ip df