Spt-threshold <packets> infinity – ADTRAN 5000 Series User Manual
Page 1133
Command Reference Guide
Router (PIM Sparse) Configuration Command Set
61200990L1-35E
Copyright © 2005 ADTRAN
1133
spt-threshold <packets> infinity
Use the spt-threshold command to change the PIM Sparse Shortest Path Tree (SPT) threshold, which
specifies the number of packets the router sends using the rendezvous point (RP) before switching to the
SPT.
Syntax Description
<packets>
Specifies the number of packets the routing switch sends using the RP
before switching to the SPT. Valid range: 1 to 4294967295.
infinity
Causes all sources to use the shared RP tree.
Default Values
By default, the SPT threshold is set to 1 packet.
Applicable Platforms
This command applies to the NetVanta 2000 and 5000 and the Total Access 900 Series units.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example sets the SPT threshold at five packets:
(config)#router pim-sparse
(config-pim-sparse)#spt-threshold 5