ADTRAN 5000 Series - Manual (Page 460)

Command Reference Guide Global Configuration Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 460
spanning-tree forward-time <seconds>
Use the spanning-tree forward-time command to specify the delay interval (in seconds) when forwarding
spanning-tree packets. Use the no form of this command to return to the default interval.
Syntax Description
<seconds> Specifies the forwarding delay interval in seconds (Range: 4 to 30).
Default Values
By default, the forwarding delay is set to 15 seconds.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example sets the forwarding time to 18 seconds:
(config)#spanning-tree forward-time 18