ADTRAN 5000 Series - Manual (Page 1144)

Command Reference Guide Router (RIP) Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 1144
version [1 | 2]
Use the version command to specify (globally) the Routing Information Protocol (RIP) version used on all
IP interfaces. This global configuration is overridden using the configuration commands ip rip send
version and ip rip receive version. Use the no form of this command to return to the default value.
Syntax Description
1 Specifies RIP version 1 be used globally.
2 Specifies RIP version 2 be used globally.
Default Values
By default, RIP is not enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example specifies RIP version 2 as the global RIP version:
(config)#router rip
(config-rip)#version 2