Rockwell Automation GV3000/SE AC Gen. Purpose & Vector Bookshelf Drive Start-Up and Reference Manual - Manual (Page 132)

4-46 GV3000/SE AC Bookshelf Drive Software Reference, Version 6.06
P.054 Level Sense Start Enable (continued)
Figure 4.8 shows an example of a typical circuit that can be used. This circuit will
energize an alarm device prior to motor start up.
Note that if P.000 = rE, the terminal strip LOC/REM switch determines the control
source (local or remote) at power up.
!
ATTENTION: As a safety precaution, Reliance Electric recommends that
the user provide an audible or visual alarm to indicate that this feature
is enabled and the motor may start when power is applied to the drive.
The user should also post warnings on the motor, the drive, and any
other applicable equipment to alert personnel that the application uses
an automatic start-up feature. Failure to observe this precaution could
result in severe bodily injury or loss of life.
Figure 4.8 – Sample Alarm Circuit for Drives Using the Level Sense Enable Feature
 9$&
+RUQ
5HOD\
5HOD\
5HOD\
*96( 'ULYH
6HW 3 WR