Rockwell Automation GV3000/SE AC Gen. Purpose & Vector Bookshelf Drive Start-Up and Reference Manual - Manual (Page 88)

4-2 GV3000/SE AC Bookshelf Drive Software Reference, Version 6.06
4.2 Parameter Types
There are three types of parameters:
Configurable: These parameters can be adjusted or changed only while the drive is
stopped.
Tunable: These parameters can be adjusted or changed while the drive is running or
stopped.
Read only: These parameters cannot be adjusted.
Each parameter is described in detail in this chapter. The following information is
provided for each parameter:
Parameter Number: the unique number assigned to a specific parameter. The
number is preceded by either P, H, U, or r to identify it as a General, Volts/Hertz,
Vector, or optional RMI parameter, respectively. The parameter number is
displayed on the drive’s keypad/display.
Figure 4.1 – Parameter Menu Structure
)LUVW 0HQX
*HQHUDO 3DUDPHWHUV
3  3
(UURU /RJ
3DVVZRUG PXVW EH HQWHUHG
LQWR 3 WR DFFHVV WKHVH
SDUDPHWHUV
6HFRQG 0HQX
*HQHUDO 3DUDPHWHUV
3  3
9ROWV+HUW]
3DUDPHWHUV
+  +
9HFWRU
3DUDPHWHUV
8  8
50,
3DUDPHWHUV
U  U
(QWHU SDVVZRUG LQWR 3
3 8(& 3 8+ GHIDXOW
,I RSWLRQDO 50, ERDUG LV LQVWDOOHG