Rockwell Automation GV3000/SE AC Gen. Purpose & Vector Bookshelf Drive Start-Up and Reference Manual - Manual (Page 49)

Starting Up the Drive for Vector Regulation 2-11
Step 5.11 Press the ▲ key to display P.003, Minimum Speed.
This parameter sets the minimum speed
in RPM.
Step 5.12 Press the ENTER key to display the default setting of P.003.
This displays the default setting for
Minimum Speed, 150 RPM.
Step 5.13 Press the ▲ key to increase minimum speed or ▼ the key to decrease
minimum speed.
The adjustment range is:
0 to the value set for P.004 (Maximum
Speed)
VALUE ENTERED:
!
ATTENTION: The drive can operate at and maintain zero speed. The
user is responsible for ensuring safe conditions for operating personnel
by providing suitable guards, audible or visual alarms, or other devices
to indicate that the drive is operating or may operate at or near zero
speed. Failure to observe this precaution could result in severe bodily
injury or loss of life.
S
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0
L
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0