Rockwell Automation GV3000/SE AC Gen. Purpose & Vector Bookshelf Drive Start-Up and Reference Manual - Manual (Page 55)

Starting Up the Drive for Vector Regulation 2-17
Step 6.8 Press the ENTER key to display the default setting of U.001.
This displays the default setting for Encoder
PPR, 1024 PPR.
Step. 6.9 Press the ▲ key to increase the PPR, or the ▼ key to decrease the PPR
.
Select one of the four PPR values if an
encoder is used. Select SE if an encoder is
not used. See the description of U.001 in
chapter 4 for more information.
VALUE ENTERED:
Step 6.10 Press the ENTER key to save the changed value.
After pressing ENTER, the same parameter
is displayed. You can now move to the next
parameter.
!
ATTENTION: Do not use a 4096 PPR encoder with a 2-pole motor.
Overspeed and motor damage can result. Failure to observe this
precaution could result in bodily injury.
L
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0
XL
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0