Rockwell Automation GV3000/SE AC Gen. Purpose & Vector Bookshelf Drive Start-Up and Reference Manual - Manual (Page 58)

2-20 GV3000/SE AC Bookshelf Drive Software Reference, Version 6.06
Step. 6.17 Press the ▲ key to increase the motor nameplate base frequency or the
▼ key to decrease motor nameplate base frequency.
The adjustment range is:
15.0 Hz to 120.0 Hz
VALUE ENTERED:
Step 6.18 Press the ENTER key to save the changed value.
After pressing ENTER, the same parameter
is displayed. You can now move to the next
parameter.
Step 6.19 Press the ▲ key to display U.004, Motor Nameplate Amps.
This parameter is the Motor Nameplate
Rated Amps and is taken from the motor
nameplate.
X
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0
!
ATTENTION: This parameter setting must not exceed the rated amps
found on the motor nameplate. Overcurrent or excess heating of the
motor could result if this is not the case. Failure to observe this precaution
could result in damage to, or destruction of, the equipment.
X
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0