Rockwell Automation GV3000/SE AC Gen. Purpose & Vector Bookshelf Drive Start-Up and Reference Manual - Manual (Page 42)

2-4 GV3000/SE AC Bookshelf Drive Software Reference, Version 6.06
Step 2. Select Program Mode
In this step, you will select program mode, which gives you access to the First Menu
General (P) parameters.
Step 3. Enter the Second Menu Password
This step is required to access the Second Menu General (P) parameters and Vector
(U) parameters.
Step 2.1 Press the PROG key.
The PROG LED is on and the First Menu
General (P) parameters can be accessed.
Step 2.2 Press the ENTER key.
The first General (P) parameter in the First
Menu, P.000, is displayed.
Step 3.1 Press the ▲ key until P.006, Second Menu Password, is displayed.
This parameter allows you to enter the
password that allows access to the Second
Menu.
The Second Menu provides access to all
parameters and the error log.
S
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0
S
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0
S
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0