Rockwell Automation GV3000/SE AC Gen. Purpose & Vector Bookshelf Drive Start-Up and Reference Manual - Manual (Page 59)

Starting Up the Drive for Vector Regulation 2-21
Step 6.20 Press the ENTER key to display the default setting of U.004.
This displays the Motor Nameplate
Amps setting. The default depends on
the HP rating of the Power Module. The
display shown here is only an example.
Step 6.21 Press the ▲ key to increase the motor nameplate amps or the ▼ key to
decrease the motor nameplate amps.
The minimum and maximum allowed
adjustment range for this value depends
on the Power Module HP rating.
VALUE ENTERED:
Step 6.22 Press the ENTER key to save the changed value.
After pressing ENTER, the same parameter
is displayed. You can now move to the next
parameter.
L
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0
X
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0