Rockwell Automation GV3000/SE AC Gen. Purpose & Vector Bookshelf Drive Start-Up and Reference Manual - Manual (Page 33)

Starting Up the Drive for Volts/Hertz Regulation 1-19
Step 6. Return to Monitor Mode
This step describes how to exit program mode and return to monitor mode.
Step 6.1 The display should now show the last parameter adjusted in step 5, H.018.
Step 6.2 Press the PROG key twice to exit program mode.
The display returns to monitor mode
with speed displayed. The RPM LED is
on and the PROG LED is off.
KL
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0

530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0