Rockwell Automation GV3000/SE AC Gen. Purpose & Vector Bookshelf Drive Start-Up and Reference Manual - Manual (Page 63)

Starting Up the Drive for Vector Regulation 2-25
6.33 Press the ENTER key to display the default setting of U.022.
This displays the default setting for Motor
Nameplate Horsepower. The default setting
depends on the Power Module rating and is
factory-set. The display here is only an
example.
6.34 Press the ▲ key or the ▼ key to increase or decrease the value if it is different
from the motor nameplate.
The adjustment range is 0.3 to 600.0 HP.
VALUE ENTERED:
6.35 Press the ENTER key to save the displayed value.
After pressing ENTER, the same parameter
is displayed. You can now move to the next
parameter.

530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0
X
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0