Rockwell Automation GV3000/SE AC Gen. Purpose & Vector Bookshelf Drive Start-Up and Reference Manual - Manual (Page 35)

Starting Up the Drive for Volts/Hertz Regulation 1-21
Step 7.5 Press the ▼ key to decrease the speed reference value.
Step 7.6 Press the ENTER key to return to monitor mode.
Step 7.7 Verify that you have selected run mode and the forward direction. Press
the START key.
The drive is now running. The
keypad/display is in monitor mode and
the RPM, RUN, and FWD LEDs are on.
The drive should be running at minimum
speed. The sample display shows
150 RPM.
Step 7.8 Visually check that the motor rotates counter-clockwise (CCW) when
viewed from the driven motor shaft end.

530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0
L
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0
CCW