Rockwell Automation GV3000/SE AC Gen. Purpose & Vector Bookshelf Drive Start-Up and Reference Manual - Manual (Page 62)

2-24 GV3000/SE AC Bookshelf Drive Software Reference, Version 6.06
Step 6.29 Press the ENTER key to display the default setting of U.007.
This displays the default setting for the
Motor Nameplate Volts. The default setting
depends on the Power Module rating and is
factory set. The display shown here is only
an example.
Step 6.30 Press the ▲ key or the ▼ key to increase or decrease the motor
nameplate volts.
The adjustment range is:
100 to 690 Volts
VALUE ENTERED:
Step 6.31 Press the ENTER key to save the displayed value.
After pressing ENTER, the same parameter
is displayed. You can now move to the next
parameter.
Step 6.32 Press the ▲ key to display U.022, Motor Nameplate Horsepower.
This parameter specifies the motor
horsepower as it appears on the motor
nameplate.

530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0
X
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0
X
530
9
$
+]
N:
754
3$66
581
-2*
$872
):'
5(9
352*
5(0