B - controlnet module parameters, Ppendix, Controlnet module parameters – Rockwell Automation RECOMM-CNET ControlNet Communications Module User Manual
Page 107
ControlNet Module Parameters
B-1
A
PPENDIX
B
ControlNet Module
Parameters
The following information is provided for each ControlNet module
parameter along with its description:
About Parameter Numbers
The parameters in the ControlNet module are numbered
sequentially. However, depending on the configuration tool used,
they may have different numbers.
Parameter Number:
Unique number assigned to each
parameter.
Parameter Name:
Unique name assigned to each
parameter.
Range:
Predefined parameter limits or
selections.
Default:
Factory default setting.
Type:
Read Only or Read/Write
Reset Required:
Module must be reset before parameter
value is recognized.
Configuration Tool
Numbering Schemes
• VS Utilities
• OIM
The module parameters begin with
parameter 1. For example, parameter 01
(DPI Port) is parameter 1 as indicated by
the manual.
• Explicit Messaging
The module parameters are appended to
the list of drive parameters. For example,
with a drive with 300 parameters,
parameter 01 (DPI Port) is parameter 301.