Rockwell Automation RECOMM-CNET ControlNet Communications Module - Manual (Page 7)

Contents V
List of Tables
Table 2.1 – Equipment Shipped with the ControlNet Module ................... 2-2
Table 2.2 – Required User-Supplied Equipment ...................................... 2-2
Table 4.1 – Configuration Tools................................................................ 4-1
Table 4.2 – Selections for Drive Response to Communication Fault........ 4-6
Table 4.3 – Fault Configuration Parameters ............................................. 4-7
Table 4.4 – Module Configuration Status Parameters .............................. 4-8
Table 5.1 – Input/Output Table ............................................................... 5-14
Table 6.1 – Parameter Settings for the Sample Program ......................... 6-7
Table 7.1 – Parameter Settings for the Sample Program ....................... 7-16
Table 8.1 – DRIVE Status Indicator: State Definitions.............................. 8-2
Table 8.2 – MS Status Indicator: State Definitions ................................... 8-3
Table 8.3 – NET A and B Together: State Definitions .............................. 8-4
Table 8.4 – NET A and B Independently: State Definitions ...................... 8-5
Table 8.5 – Module Diagnostic Items........................................................ 8-6
Table 8.6 – Event Codes and Descriptions............................................... 8-8