Rockwell Automation RECOMM-CNET ControlNet Communications Module User Manual
Page 50
Advertising
![background image](/manuals/581573/50/background.png)
5-20
ControlNet Communications Module
Step 17. If desired, select the General tab and enter a name and
description for the network (figure 5.28). Click OK.
Step 18. In the Network menu, select Save the properties and
download them to the PLC. The module(s) are now
mapped on the network and the controller will
communicate with it.
Figure 5.28 – ControlNet: General Tab
RECOMM-CNET ControlNet demonstration
program using two SP600 demo units.
Advertising