Rockwell Automation RECOMM-CNET ControlNet Communications Module - Manual (Page 11)

Getting Started 2-1
C
HAPTER
2
Getting Started
This chapter provides:
• A description of the ControlNet module components
• A list of parts shipped with the module
• A list of user-supplied parts required for installing the module
• An installation checklist
2.1 ControlNet Module Components
➊ Status Indicators Four LEDs that indicate the status of the
ControlNet channel(s), DPI, and the module. Refer
to chapter 8 for more information.
➋ DPI Connector A 20-pin, single-row shrouded male header. An
Internal Interface cable is connected to this
connector and a connector on the drive.
➌ Channel A BNC
Receptacle Channel “A” BNC connection for the ControlNet
cable.
➍ Channel B BNC
Receptacle Channel “B” BNC is an optional connection for the
redundnat ControlNet cable.
➎ ControlNet Node
Address Switches Switches for setting the node address.
Figure 2.1 – Components of the ControlNet Module
➊
➋
➌ ➍
➎