Rockwell Automation RECOMM-CNET ControlNet Communications Module - Manual (Page 32)

5-2 ControlNet Communications Module
5.1.1 Installing and Registering EDS Files in
RSNetWorx
This section needs to be performed only if new EDS (Electronic
Data Sheet) files need to be added to RSNetWorx. The latest EDS
files can be obtained at:
http://www.reliance.com/prodserv/standriv/networks.
In the Tools menu, select EDS Wizard and click Next (figure 5.2).
Step 1. The EDS Wizard can be used to install (register) new
EDS files to the RSNetWorx database, remove
(unregister) EDS files from the RSNetWorx database, and
change the graphic icon used to represent the device.
Select Register an EDS file(s) and click Next (figure
5.3).
Figure 5.2 – Rockwell Software EDS Wizard