Rockwell Automation RECOMM-CNET ControlNet Communications Module - Manual (Page 12)

2-2 ControlNet Communications Module
2.2 Required Equipment
Table 2.1 lists the equipment shipped with the ControlNet module.
When you unpack the module, verify that the package includes all of
these items.
Table 2.2 lists user-supplied equipment also required to install and
configure the ControlNet module.
Table 2.1 – Equipment Shipped with the ControlNet Module
Item Description
One RECOMM-CNET ControlNet module
A 2.54 cm (1 in) and a 15.24 cm (6 in) Internal Interface cable
(only one cable is needed to connect the module to the drive)
One grounding wrist strap
ControlNet Module User Manual (D2-3497)
Table 2.2 – Required User-Supplied Equipment
Item Description
A small flathead or Phillips screwdriver
Configuration tool, such as:
• LCD OIM
• VS Utilities (version 1.01 or later)
• with RECOMM-232 Serial Converter
RSNetWorx for ControlNet (version 3.00.00 or later)
Controller configuration software (for example, RSLogix 5,
RSLogix 500, or RSLogix 5000)
A PC connection to the ControlNet network, such as:
• 1784-PCC
• 1770-KFC
• 1784-KTCX