Rockwell Automation RECOMM-CNET ControlNet Communications Module - Manual (Page 47)

RSNetWorx Configuration for PLC-5C Applications 5-17
Step 13. Repeat steps 9-12 for additional nodes. When complete,
all of the nodes should be mapped (figure 5.23).
Step 14. Click File / Save to save the project (figure 5.24). If
prompted to optimize and re-write schedule for all
connections, click OK.
Figure 5.23 – ScanList Configuration: Mapped Nodes
Figure 5.24 – Save Configuration Dialog Box
SP600
SP600