Rockwell Automation RECOMM-CNET ControlNet Communications Module - Manual (Page 72)

7-4 ControlNet Communications Module
Step 3. Enter a Name, Slot number, and Revision number
(figure 7.4). Click Next>.
Step 4. This step is used to define controller-to-module behavior
(figure 7.5). Inhibit Module inhibits/un-inhibits the
connection to the module. The Major Fault check-box
selects if a failure on the connection of this module
causes a major fault on the controller if the connection for
the module fails. Click Next>.
Figure 7.4 – Module Properties: Name Selection
Figure 7.5 – Module Properties: Controller-to-Module Behavior Screen