Rockwell Automation RECOMM-CNET ControlNet Communications Module - Manual (Page 80)

7-12 ControlNet Communications Module
Step 17. An Attention symbol is located next to the Node 2
(SP600_02) icon in figure 7.17, which indicates the
ControlNet scanner needs to be configured.
Step 18. Start RSNetWorx and perform the following:
a. Click the On-line icon and browse the network.
b. Select Edits Enabled and view the messages in the
Message View for completion (figure 7.18). The
i con should disappear from the nodes in the Graphical
View.
c. Select File / Save and save the project (figure 7.19).
d. Close RSNetworx.
This schedules the I/O that was configured in
RLSLogix 5000.
Figure 7.17 – RSLogix: Attention Symbol
RSLogix 5000 - Example_RECOMM-CNET [1756-L1]
Controller Example - RECOMM-CNET
SP600_02
RE:
RE:
RE: