Rockwell Automation RECOMM-CNET ControlNet Communications Module - Manual (Page 83)

ControlLogix Applications 7-15
Step 19. The Attention symbol on the RSLogix 5000 connection
tree will disappear if the network has been configured
properly (figure 7.20). You are now ready to develop your
ladder logic program.
7.2 Function of the Sample Program
The program performs the following actions:
• Obtains Logic Status information from the drive.
• Uses the Logic Command to control the drive (for example, start,
stop).
• Sends a Reference to the drive and receives Feedback from the
drive.
• Sends/Receives Datalink data to/from the drive.
Module Settings For Use With the Example
Nodes 2 and 3.
Figure 7.20 – RSLogix 5000: Connection Tree Without Attention Symbol
RSLogix 5000 - Example_RECOMM-CNET [1756-L1]
Controller Example_RECOMM-CNET
SP600
RE:
RE:
RE: