Rockwell Automation RECOMM-CNET ControlNet Communications Module - Manual (Page 9)

Introduction 1-1
C
HAPTER
1
Introduction
The ControlNet  module (RECOMM-CNET) is an embedded
communication option for DPI  AC drives, such as the SP600 
drive. The module is mounted in the drive and receives its required
power from the drive and from the network.
The module can be used with other products that implement DPI, a
peripheral communication interface. Refer to the documentation for
your product for specific information about how it works with the
module.
This manual is intended for qualified electrical personnel familiar
with installing, programming, and maintaining AC drives and
networks.
1.1 ControlNet Module Features
The ControlNet module features the following:
• A number of configuration tools that can be used to configure the
module and connected drive. The tools include the LCD Operator
Interface Module (OIM) on the drive and drive-configuration
software such as VS Utilities
 (version 1.01 or later) .
• Status indicators that report the status of the drive
communications, module, and network. They are visible both
when the cover is opened and when it is closed.
• I/O, including Logic Command/Reference and up to four pairs of
Datalinks, that may be configured for your application using a
parameter.
• Support of explicit messages.
• User-defined fault actions that determine how the module and the
drive respond to communication disruptions on the network and
controllers in idle mode.