Metrohm 756 KF Coulometer - Manual (Page 28)

3.4 Configuration, key <CONFIG>
756/831 KF Coulometer, Instructions for Use 20
man.reports to:
int. (only 756)
COM1
COM2
balance: Sartorius
stirrer control: ON
remote box: OFF
keyboard: US
barcode: input
Target for the output of manually triggered reports (1, 2,
1&2 and only at 756: int., 1&int., 2&int, all)
Manually triggered reports e.g. with <PRINT> .... .
Exception <PRINT><REPORTS>: These reports are
outputted at the target as defined in the method.
Selection of balance (Sartorius, Mettler, Mettler AT,
AND, Precisa)
Sartorius
: Models MP8, MC1
Mettler
: Models AM, PM and balances with 011,
012, and 016 interfaces
Mettler AT
: Model AT
AND
: Models ER-60, 120, 180, 182, FR-200, 300
and FX-200, 300, 320
Precisa
: Models with RS232C interface
Automatic switching ON/OFF of the stirrer in the titration
sequence (ON, OFF)
If stirrer control is
ON
, the stirrer will be switched
automatically. For stirrer control the red switch on the
stirrer unit must be ON.
Connection of a remote box (on ,OFF)
To the remote socket for PC keyboard and barcode
reader, see page 124.
If
on
has been set:
Type of PC keyboard (US, German, French, Spanish,
Swiss.)
The PC keyboard is used as an input aid, see page
125.
Target for barcode reader (input, method, id1, id2, id3,
smpl size)
The barcode reader is used as an input aid, see page
124.
Input
: The barcode string goes to the entry field in
which the cursor is currently located.
Method
: The barcode string goes to the entry field
"Methods" in the silo memory.
Id1
: The barcode string goes to the entry field
"Id1". (Similar for Id2 and Id3.)
Smpl size
: The barcode string goes to the entry field
"smpl size".
> auxiliaries
dialog: english
date 1998-04-23
time 08:13
Various auxiliary settings
Selection of dialog language (english, deutsch,
francais, español, italiano, portugese, svenska)
Current date (YYYY-MM-DD)
Format: year-month-day, entry with leading zeros.
Current time (HH-MM)
Format: hours-minutes, entry with leading zeros.