Metrohm 756 KF Coulometer - Manual (Page 30)

3.4 Configuration, key <CONFIG>
756/831 KF Coulometer, Instructions for Use 22
>report
report id: ON
instrument id: ON
date, time: ON
run number: ON
method: ON
sample: ON
drift: ON
titr.time: ON
H2O: ON
statistics: ON
signature: OFF
Configuration of the report
Printing report lines or data can be switched on and
off. This means that the report can be arranged
according to your requirements.
Prints the line "Report-Id" (ON, OFF)
e.g. 'fr.
If you use Vesuv 3 the report identification is switched
on automatically.
Prints the line(s) "instrument-Id" (ON, OFF)
756 (or 831) KF Coulometer, instrument-Id and
program version.
Prints the line(s) "date, time" (ON, OFF)
If you use Vesuv 3 then date/time is switched on
automatically.
Prints the sample number (ON, OFF)
The date line is printed without the sample number.
Prints the line "Method" (ON, OFF)
e.g. KFC ********
Prints the line "Smpl size" (ON, OFF)
Prints the line "Drift" (ON, OFF)
Prints the line "Titr.time" (ON, OFF)
Prints the line "H2O" (ON, OFF)
Continuously prints the statistical results (ON, OFF)
With "OFF" the statistical results will only be printed out
when the number n for statistics has been reached.
Prints the line "Signature" (ON, OFF)
> common variables
C30 0.0
etc.
Values of the common variables
Common variables C30...C39 (0.. ± 999 999)
The values of all common variables are displayed. For
creating common variables see page 39.