Dell POWEREDGE M1000E - Manual (Page 1001)

B-85
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug sw-vlan
debug sw-vlan
Use the debug sw-vlan privileged EXEC command to enable debugging of VLAN manager activities.
Use the no form of this command to disable debugging.
debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management | mapping |
notification | packets | redundancy | registries | vtp}
no debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management | mapping
| notification | packets | redundancy | registries | vtp}
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
badpmcookies Display debug messages for VLAN manager incidents of bad port manager
cookies.
cfg-vlan {bootup | cli} Display config-vlan debug messages. The keywords have these meanings:
• bootup—Display messages when the switch is booting up.
• cli—Display messages when the command-line interface (CLI) is in
config-vlan mode.
events Display debug messages for VLAN manager events.
ifs See the debug sw-vlan ifs command.
management Display debug messages for VLAN manager management of internal
VLANs.
mapping Display debug messages for VLAN mapping.
notification See the debug sw-vlan notification command.
packets Display debug messages for packet handling and encapsulation processes.
redundancy Display debug messages for VTP VLAN redundancy.
registries Display debug messages for VLAN manager registries.
vtp See the debug sw-vlan vtp command.
Release Modification
12.2(40)EX1 This command was introduced.