Dell POWEREDGE M1000E - Manual (Page 917)

B-1
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
A P P E N D I X
B
Cisco Catalyst Blade Switch 3130 and 3032 for
Dell Debug Commands
This appendix describes the debug privileged EXEC commands that have been created or changed for
use with the switch. These commands are helpful in diagnosing and resolving internetworking problems
and should be enabled only under the guidance of Cisco technical support staff.
Caution Because debugging output is assigned high priority in the CPU process, it can render the system
unusable. For this reason, use the debug commands only to troubleshoot specific problems or during
troubleshooting sessions with Cisco technical support staff. It is best to use the debug commands during
periods of lower network traffic and fewer users. Debugging during these periods decreases the
likelihood that increased debug command processing overhead will affect system use.