Dell POWEREDGE M1000E - Manual (Page 1079)

Index
IN-19
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
sticky learning, enabling 2-787
storm-control command 2-759
STP
BackboneFast 2-703
counters, clearing 2-92
debug messages, display
BackboneFast events B-77
MSTP B-80
optimized BPDUs handling B-79
spanning-tree activity B-75
switch shim B-82
transmitted and received BPDUs B-78
UplinkFast B-84
detection of indirect link failures 2-703
enabling protocol tunneling for 2-278
EtherChannel misconfiguration 2-710
extended system ID 2-712
path cost 2-708
protocol modes 2-720
root port
accelerating choice of new 2-744
loop guard 2-714
preventing from becoming designated 2-714
restricting which can be root 2-714
root guard 2-714
UplinkFast 2-744
root switch
affects of extended system ID 2-712, 2-747
hello-time 2-746
interval between BDPU messages 2-746
interval between hello BPDU messages 2-746
max-age 2-746
port priority for selection of 2-736
primary or secondary 2-746
switch priority 2-746
STP (continued)
state changes
blocking to forwarding state 2-741
enabling BPDU filtering 2-704, 2-738
enabling BPDU guard 2-706, 2-738
enabling Port Fast 2-738, 2-741
enabling timer to recover from error state 2-166
forward-delay time 2-746
length of listening and learning states 2-746
shutting down Port Fast-enabled ports 2-738
state information display 2-656
VLAN options 2-733, 2-746
SVIs, creating 2-181
SVI status calculation 2-773
Switched Port Analyzer
See SPAN
switching characteristics
modifying 2-769
returning to interfaces 2-769
switchport access command 2-771
switchport autostate exclude command 2-773
switchport backup interface command 2-775
switchport block command 2-778
switchport command 2-769
switchport host command 2-779
switchport mode command 2-780
switchport mode private-vlan command 2-783
switchport nonegotiate command 2-785
switchport port-security aging command 2-792
switchport port-security command 2-787
switchport priority extend command 2-794
switchport private-vlan command 2-796
switchport protected command 2-798
switchports, displaying 2-513
switchport trunk command 2-800
switchport voice detect 2-803
switchport voice vlan command 2-804
switch priority command 2-762, 2-764
switch provision command 2-765