Dell POWEREDGE M1000E User Manual

Page 845

Advertising
background image

2-815

Cisco Catalyst Blade Switch 3120 for HP Command Reference

OL-12248-03

Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands

traceroute mac ip

The Layer 2 traceroute feature is not supported when multiple devices are attached to one port through
hubs (for example, multiple CDP neighbors are detected on a port). When more than one CDP neighbor
is detected on a port, the Layer 2 path is not identified, and an error message appears.

This feature is not supported in Token Ring VLANs.

Examples

This example shows how to display the Layer 2 path by specifying the source and destination IP
addresses and by using the detail keyword:

Switch# traceroute mac ip 2.2.66.66 2.2.22.22 detail

Translating IP to mac .....

2.2.66.66 => 0000.0201.0601

2.2.22.22 => 0000.0201.0201

Source 0000.0201.0601 found on con6[WS-C2950G-24-EI] (2.2.6.6)

con6 / WS-CBS3130G-S / 2.2.6.6 :

Gi0/0/1 [auto, auto] => Gi0/0/3 [auto, auto]

con5 / WS-C2950G-24-EI / 2.2.5.5 :

Fa0/3 [auto, auto] => Gi0/1 [auto, auto]

con1 / WS-C3550-12G / 2.2.1.1 :

Gi0/1 [auto, auto] => Gi0/2 [auto, auto]

con2 / WS-C3550-24 / 2.2.2.2 :

Gi0/2 [auto, auto] => Fa0/1 [auto, auto]

Destination 0000.0201.0201 found on con2[WS-C3550-24] (2.2.2.2)

Layer 2 trace completed.

This example shows how to display the Layer 2 path by specifying the source and destination hostnames:

Switch# traceroute mac ip con6 con2

Translating IP to mac .....

2.2.66.66 => 0000.0201.0601

2.2.22.22 => 0000.0201.0201

Source 0000.0201.0601 found on con6

con6 (2.2.6.6) :Gi0/0/1 => Gi0/0/3

con5 (2.2.5.5 ) : Gi0/0/3 => Gi0/1

con1 (2.2.1.1 ) : Gi0/0/1 => Gi0/2

con2 (2.2.2.2 ) : Gi0/0/2 => Fa0/1

Destination 0000.0201.0201 found on con2

Layer 2 trace completed

This example shows the Layer 2 path when ARP cannot associate the source IP address with the
corresponding MAC address:

Switch# traceroute mac ip 2.2.66.66 2.2.77.77

Arp failed for destination 2.2.77.77.

Layer2 trace aborted.

Related Commands

Command

Description

traceroute mac

Displays the Layer 2 path taken by the packets from the specified source MAC
address to the specified destination MAC address.

Advertising