Dell POWEREDGE M1000E - Manual (Page 601)

2-571
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show ipv6 route updated
show ipv6 route updated
Use the show ipv6 route updated command in user EXEC command to display the current contents of
the IPv6 routing table.
show ipv6 route [protocol] updated [boot-up] {hh:mm | day{month [hh:mm]} [{hh:mm |
day{month [hh:mm]}] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
protocol (Optional) Displays routes for the specified routing protocol using any of
these keywords:
• bgp
• isis
• ospf
• rip
or displays routes for the specified type of route using any of these keywords:
• connected
• local
• static
• interface interface id
boot-up Display the current contents of the IPv6 routing table.
hh:mm Enter the time as a 2-digit number for a 24-hour clock. Make sure to use the
colons (:). For example, enter 13:32
day Enter the day of the month. The range is from 1 to 31.
month Enter the month in upper case or lower case letters. You can enter the full
name of the month, such as January or august, or the first three letters of
the month, such as jan or Aug.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX1 This command was introduced.