Dell POWEREDGE M1000E - Manual (Page 185)

2-155
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
energywise (interface configuration)
Defaults The importance is 1.
No keywords are defined.
The power level is 10.
The name is the short version of the port name; for example, Gi1.0.2 for Gigabit Ethernet 1/0/2.
The role is the model number.
Command Modes Privileged EXEC
Command History
Examples This example shows how to enable and configure EnergyWise on the PoE port.
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# energywise domain cisco secret cisco protocol udp port 43440 ip 2.2.4.30
Switch(config)# interface gigabitethernet1/0/3
Switch(config-if)# energywise level 10 recurrence importance 90 at 0 8 * * *
Switch(config-if)# energywise level 0 recurrence importance 90 at 0 20 * * *
Switch(config-if)# energywise inportance 50
Switch(config-if)# energywise name lobbyInterface.3
Switch(config-if)# energywise role role.lobbyaccess
Switch(config-if)# end
Related Commands
name name (Optional) Specify the EnergyWise-specific port name.
• You can enter alphanumeric characters and symbols such as #, (, %, !, or
&.
• Do not use an asterisk (*) or a blank space between the characters and
symbols.
role role (Optional) Specify the role of the port in the domain. For example,
lobbyport.
• You can enter alphanumeric characters and symbols such as #, (, %, !, or
&.
• Do not use an asterisk (*) or a blank space between the characters and
symbols.
Release Modification
12.2(50)SE This command was introduced.
Command Description
show energywise Displays the EnergyWise settings and status.
show energywise domain Displays the domain to which the entity belongs.
show energywise recurrence Displays the recurrence settings and status.