Show nmsp – Dell POWEREDGE M1000E User Manual
Page 668
2-638
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show nmsp
show nmsp
Use the show nmsp privileged EXEC command to display the Network Mobility Services Protocol
(NMSP) information for the switch. This command is available only when your switch is running the
cryptographic (encrypted) software image.
show nmsp {attachment suppress interface | capability | notification interval | statistics
{connection | summary} | status | subscription {detail | summary}} [ | {begin | exclude |
include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
Examples
This is an example of output from the show nmsp attachment suppress interface command:
Switch# show nmsp attachment suppress interface
NMSP Attachment Suppression Interfaces
--------------------------------------
GigabitEthernet1/1
GigabitEthernet1/2
attachment suppress
interface
Display attachment suppress interfaces.
capability
Display switch capabilities including the supported services and
subservices.
notification interval
Display the notification intervals of the supported services.
statistics {connection |
summary}
Display the NMSP statistics information.
•
connection—display the message counters on each connection.
•
summary—display the global counters.
status
Display information about the NMSP connections.
subscription {detail |
summary}
Display the subscription information on each NMSP connection.
•
detail—display all services and subservices subscribed on each
connection.
•
summary—display all services subscribed on each connection.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(50)SE
This command was introduced.