Dell POWEREDGE M1000E User Manual
Page 144
2-114
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
diagnostic schedule
Usage Guidelines
Use these guidelines when scheduling testing:
•
name—Enter the
content privileged EXEC command to display the test names in
the test ID list.
•
test-id—Enter the
content command to display the test numbers in the test ID list.
•
test-id-range—Enter the
content command to display the test numbers in the test
ID list. Enter the range as integers separated by a comma and a hyphen (for example, 1,3-6 specifies
test IDs 1, 3, 4, 5, and 6).
•
hh:mm—Enter the time as a 2-digit number (for a 24-hour clock) for hours:minutes; the colon (:) is
required, such as 12:30.
•
For mm dd yyyy:
–
mm—Spell out the month, such as January, February, and so on, with upper case or lower case
characters.
–
dd—Enter the day as a 2-digit number, such as 03 or 16.
–
yyyy—Enter the year as a 4-digit number, such as 2006.
•
day-of-week—Spell out the day of the week, such as Monday, Tuesday, and so on, with upper case
or lower case characters.
Note
If you are running a diagnostic test that has the reload attribute on a switch in a stack, you could
potentially partition the stack depending on your cabling configuration. To avoid partitioning your stack,
enter the
detail privileged EXEC command to verify the stack configuration.
Examples
This example shows how to schedule diagnostic testing for a specific day and time on stack member 3 when
this command is entered on a stack master:
Switch(config)# diagnostic schedule switch 3 test 1,2,4-6 on november 3 2006 23:10
This example shows how to schedule diagnostic testing to occur weekly at a specific time on a
standalone switch:
Switch(config)# diagnostic schedule test TestPortAsicMem weekly friday 09:23
Related Commands
Command
Description
Displays online diagnostic test results.