Debug platform matm – Dell POWEREDGE M1000E User Manual
Page 966
B-50
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug platform matm
debug platform matm
Use the debug platform matm privileged EXEC command to enable debugging of platform-dependent
MAC address management. Use the no form of this command to disable debugging.
debug platform matm {aging | all | ec-aging | errors | learning | rpc | secure-address | warnings}
no debug platform matm {aging | all | ec-aging | errors | learning | rpc | secure-address |
warnings}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The undebug platform matm command is the same as the no debug platform matm command.
On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands
aging
Display MAC address aging debug messages.
all
Display all platform MAC address management event debug messages.
ec-aging
Display EtherChannel address aging-related debug messages.
errors
Display MAC address management error messages.
learning
Display MAC address management address-learning debug messages.
rpc
Display MAC address management remote procedure call (RPC) related debug
messages.
secure-address
Display MAC address management secure address learning debug messages.
warning
Display MAC address management warning messages.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
Displays information about platform-independent MAC address management.
show debugging
Displays information about the types of debugging that are enabled.