Dell POWEREDGE M1000E - Manual (Page 407)

2-377
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
nmsp attachment suppress
nmsp attachment suppress
Use the nmsp attachment suppress interface configuration mode command to suppress the reporting
of attachment information from a specified interface. This command is available only when your switch
is running the cryptographic (encrypted) software image. Use the no form of this command to return to
the default setting.
nmsp attachment suppress
no nmsp attachment suppress
Syntax Description This command has no arguments or keywords.
Defaults This command has no default setting.
Command Modes Interface configuration
Command History
Usage Guidelines Use the nmsp attachment suppress interface configuration command to configure an interface to not
send location and attachment notifications to a Cisco Mobility Services Engine (MSE).
Examples This example shows how to configure an interface to not send attachment information to the MSE:
Switch(config)# switch interface interface-id
Switch(config-if)# nmsp attachment suppress
Related Commands
Release Modification
12.2(50)SE This command was introduced.
Command Description
nmsp Enables Network Mobility Services Protocol (NMSP) on the
switch.
show nmsp Displays the NMSP information.