Dell POWEREDGE M1000E - Manual (Page 608)

2-578
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show lacp
This is an example of output from the show lacp neighbor command:
Switch> show lacp neighbor
Flags: S - Device is sending Slow LACPDUs F - Device is sending Fast LACPDUs
A - Device is in Active mode P - Device is in Passive mode
Channel group 3 neighbors
Partner’s information:
Partner Partner Partner
Port System ID Port Number Age Flags
Gi2/0/1 32768,0007.eb49.5e80 0xC 19s SP
LACP Partner Partner Partner
Port Priority Oper Key Port State
32768 0x3 0x3C
Partner’s information:
Partner Partner Partner
Port System ID Port Number Age Flags
Gi2/0/2 32768,0007.eb49.5e80 0xD 15s SP
LACP Partner Partner Partner
Port Priority Oper Key Port State
32768 0x3 0x3C
Admin Key Administrative key assigned to this port. LACP automatically
generates an administrative key value as a hexadecimal number.
The administrative key defines the ability of a port to aggregate
with other ports. A port’s ability to aggregate with other ports is
determined by the port physical characteristics (for example,
data rate and duplex capability) and configuration restrictions
that you establish.
Oper Key Runtime operational key that is being used by this port. LACP
automatically generates this value as a hexadecimal number.
Port Number Port number.
Port State State variables for the port, encoded as individual bits within a
single octet with these meanings:
• bit0: LACP_Activity
• bit1: LACP_Timeout
• bit2: Aggregation
• bit3: Synchronization
• bit4: Collecting
• bit5: Distributing
• bit6: Defaulted
• bit7: Expired
Note In the list above, bit7 is the MSB and bit0 is the LSB.
Table 2-31 show lacp internal Field Descriptions (continued)
Field Description