Dell POWEREDGE M1000E - Manual (Page 694)

2-664
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show switch
show switch
Use the show switch user EXEC command to display information related to the stack member or the
switch stack.
show switch [stack-member-number | chassis-mgmt | detail | neighbors | stack-ports [summary]
| stack-ring activity [detail]] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
This command displays these states:
• Waiting—A switch is booting up and waiting for communication from other switches in the stack.
The switch has not yet determined whether or not it is a stack master.
Stack members not participating in a stack master election remain in the waiting state until the stack
master is elected and ready.
stack-member-number (Optional) Display information for the specified stack member. The range
is 1 to 9.
chassis-mgmt (Optional) Display information about the enclosures in which the stack
members are installed.
detail (Optional) Display detailed information about the stack ring.
neighbors (Optional) Display the neighbors for the entire switch stack.
stack-ports [summary] (Optional) Display port information for the entire switch stack. Use the
summary keyword to display the stack cable length, the stack link status,
and the loopback status.
stack-ring activity
[detail] (Optional) Display the number of frames per stack member that are sent to
the stack ring. Use the detail keyword to display the ASIC, the receive
queues, and the number of frames per stack member that are sent to the
stack ring.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX1 This command was introduced.
12.2(50)SE The display was expanded to include stack cable, link, and loopback
information. The stack ports [summary] keywords were added.