Dell POWEREDGE M1000E - Manual (Page 1019)

C-9
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix C Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commands
show platform frontend-controller
show platform frontend-controller
Use the show platform frontend-controller privileged EXEC command to display counter and status
information for the front-end controller manager and subordinate applications and to display the
hardware and software information for the front-end controller.
show platform frontend-controller {buffer | generic | manager number | subordinate number |
version number} [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines The subordinate number range is 0 to 2.
You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
buffer Display the last 1024 bytes sent from the manager to the subordinate and the
reverse.
generic Display the generic counters that do not specifically apply to the manager or
subordinate.
manager number Display the counters for the manager and the subordinate specified by
number. See the “Usage Guidelines” section for the number range.
subordinate number Display the subordinate status and the counters for the subordinate specified
by number. See the “Usage Guidelines” section for the number range.
version number Display the hardware and software version information for the subordinate
status specified by number. See the “Usage Guidelines” section for the
number range.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX1 This command was introduced.