Dell POWEREDGE M1000E - Manual (Page 921)

B-5
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug cisp
debug cisp
Use the debug cisp global configuration command to enable debugging message exchanges and events
on a Client Information Signalling Protocol (CISP)-enabled interface.Use the no form of this command
to disable debugging.
debug cisp [all | errors | events | packets | sync]
no debug cisp [initialization | interface-configuration | rpc]
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Related Commands
all Display all CISP debug messages.
errors Display CISP debug messages.
events Display CISP event debug messages.
packets Display CISP packet debug messages.
sync Display CISP operational synchronization debug messages.
Release Modification
12.2(50)SE This command was introduced.
Command Description
cisp enable Enables Client Information Signalling Protocol (CISP)
dot1x credentials
(global configuration)
profile
Configures a profile on a supplicant switch.
show cisp Displays CISP information for a specified interface.