Dell POWEREDGE M1000E User Manual
Page 577
2-547
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show ip igmp snooping groups
Examples
This is an example of output from the show ip igmp snooping groups command without any keywords.
It displays the multicast table for the switch.
Switch# show ip igmp snooping groups
Vlan Group Type Version Port List
-------------------------------------------------------------
1 224.1.4.4 igmp Gi1/0/11
1 224.1.4.5 igmp Gi1/0/11
2 224.0.1.40 igmp v2 Gi1/0/14
104 224.1.4.2 igmp v2 Gi2/0/1, Gi2/0/2
104 224.1.4.3 igmp v2 Gi2/0/1, Gi2/0/2
This is an example of output from the show ip igmp snooping groups count command. It displays the
total number of multicast groups on the switch.
Switch# show ip igmp snooping groups count
Total number of multicast groups: 2
This is an example of output from the show ip igmp snooping groups dynamic
command. It shows
only the entries learned by IGMP snooping.
Switch# show ip igmp snooping groups vlan 1 dynamic
Vlan Group Type Version Port List
-------------------------------------------------------------
104 224.1.4.2 igmp v2 Gi2/0/1, Gi1/0/14
104 224.1.4.3 igmp v2 Gi2/0/1, Gi1/0/14
This is an example of output from the show ip igmp snooping groups vlan vlan-id ip-address
command. It shows the entries for the group with the specified IP address.
Switch# show ip igmp snooping groups vlan 104 224.1.4.2
Vlan Group Type Version Port List
-------------------------------------------------------------
104 224.1.4.2 igmp v2 Gi2/0/1, Gi1/0/14
Related Commands
Command
Description
Enables IGMP snooping on the switch or on a VLAN.
Configures a multicast router port.
Statically adds a Layer 2 port as a member of a multicast group.
Displays the IGMP snooping configuration of the switch or the
VLAN.
Displays IGMP snooping multicast router ports for the switch or
for the specified multicast VLAN.