Dell POWEREDGE M1000E - Manual (Page 1056)

C-46
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix C Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commands
show platform tcam
Syntax Description
Note Though visible in the command-line help strings, the usage keyword is not supported.
handle number Display the hardware memory handle. The range is 0 to
4294967295.
log-results Display the hardware memory log results.
table {acl | all | equal-cost-route
| ipv6 {acl | qos | secondary}
local | mac-address |
multicast-expansion | qos |
secondary | station | vlan-list} Display lookup and forwarding table information. The keywords
have these meanings:
• acl—Display the access-control list (ACL) table.
• all—Display all the hardware memory tables.
• equal-cost-route—Display the equal-cost-route table.
• ipv6—Display IPv6 information.
– acl—Display the IPv6 ACL-table information.
– qos—Display the IPv6 QoS-table information.
– secondary—Display the IPv6 secondary-table
information.
• local—Display the local table.
• mac-address—Display the MAC-address table.
• multicast-expansion—Display the IPv6 multicast-expansion
table.
• qos—Display the QoS table.
• secondary—Display the secondary table.
• station—Display the station table.
• vlan-list—Display the VLAN list table.
usage Display the CAM and forwarding table usage.
[[asic number [detail [invalid]] |
[index number [detail [invalid]] |
invalid | num number [detail
[invalid]] | invalid] | [invalid] |
[num number [detail [invalid]] |
invalid]] Display information. The keywords have these meanings:
• asic number—Display information for the specified ASIC
device ID. The range is 0 to 15.
• detail [invalid]—(Optional) Display valid or invalid details.
• index number—(Optional) Display information for the
specified hardware memory table index. The range is 0 to
32768.
• num number—(Optional) Display information for the
specified hardware memory table number. The range is 0 to
32768.
| begin (Optional) Display begins with the line that matches the
expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified
expression.
expression Expression in the output to use as a reference point.