Dell POWEREDGE M1000E User Manual
Page 295
2-265
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
ipv6 mld snooping last-listener-query-count
Examples
This example shows how to globally set the last-listener query count:
Switch(config)# ipv6 mld snooping last-listener-query-count 1
This example shows how to set the last-listener query count for VLAN 10:
Switch(config)# ipv6 mld snooping vlan 10 last-listener-query-count 3
You can verify your settings by entering the show ipv6 mld snooping [vlan vlan-id] user EXEC
command.
Related Commands
Command
Description
ipv6 mld snooping last-listener-query-interval
Sets IPv6 MLD snooping last-listener query
interval.
Configures an SDM template to optimize system
resources based on how the switch is being used.
show ipv6 mld snooping querier
Displays MLD snooping configuration.