Dell POWEREDGE M1000E - Manual (Page 361)

2-331
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
mls qos cos
This example shows how to assign all the packets entering a port to the default port CoS value of 4
on a port:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# mls qos cos 4
Switch(config-if)# mls qos cos override
You can verify your settings by entering the show mls qos interface privileged EXEC command.
Related Commands Command Description
show mls qos interface Displays quality of service (QoS) information.